Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

422 Fabric OS Message Reference
53-1000437-01
TRCE-1003
70
TRCE-1003
Message <timestamp>, [TRCE-1003], <sequence-number>,, ERROR, <system-name>, Trace dump<
optional slot indicating on which slot the dump occurs >
was not
transferred due to FTP error.
Probable Cause Indicates that a trace dump has been created on the switch or the indicated slot but is not
automatically transferred from the switch due to an FTP error, such as a wrong FTP address, FTP
site down, or network down.
Recommended
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR
TRCE-1004
Message <timestamp>, [TRCE-1004], <sequence-number>,, WARNING, <system-name>, Trace dump<
optional slot indicating on which slot the dump occurs >
was not
transferred because trace auto-FTP disabled.
Probable Cause Indicates that trace dump files have been created on the switch or the indicated slot but are not
automatically transferred from the switch because auto-FTP is disabled.
Recommended
Action
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave
command and contact your switch service provider.
Severity WARNING
TRCE-1005
Message <timestamp>, [TRCE-1005], <sequence-number>,, ERROR, <system-name>, FTP
Connectivity Test failed due to error.
Probable Cause Indicates that the connectivity test to the FTP host fails, because of an FTP error such as a wrong
FTP address, an FTP site down, or the network being down.
Recommended
Action
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave
command and contact your switch service provider.
Severity ERROR