Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 437
53-1000437-01
Chapter
75
WEBD System Messages
WEBD-1001
Message <timestamp>, [WEBD-1001], <sequence-number>,, WARNING, <system-name>, Missing or
Invalid Certificate file -- HTTPS is configured to be enabled but could not be
started.
Probable Cause Indicates that the SSL certificate file is either invalid or absent.
Recommended
Action
Run the configure command to disable HTTPS. Install a valid key file and enable HTTPS again. For
more information on the configure command, refer to the Fabric OS Command Reference.
Severity WARNING
WEBD-1002
Message <timestamp>, [WEBD-1002], <sequence-number>,, WARNING, <system-name>, Missing or
Invalid Key file -- HTTPS is configured to be enabled but could not be started.
Probable Cause Indicates that the SSL key file is either invalid or absent.
Recommended
Action
Run the configure command to disable HTTPS. Install a valid key file and enable HTTPS again. For
more information on the configure command, refer to the Fabric OS Command Reference.
Severity WARNING
WEBD-1003
Message <timestamp>, [WEBD-1003], <sequence-number>,, INFO, <system-name>, HTTP/HTTPS
interface disabled
Probable Cause Indicates that the HTTP/HTTPS interface is disabled. This is logged when HTTP/HTTPS is disabled
through the configure command.
Recommended
Action
Run the configure command to enable HTTP/HTTPS. For more information on the configure
command, refer to the Fabric OS Command Reference.
Severity INFO