Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 461
53-1000437-01
Chapter
79
AUDIT CONF System Messages
CONF-1000
Message AUDIT, <timestamp>, [CONF-1000], INFO, CFG, <event-initiator-details>,
<event-location>, , configDownload completed successfully.
<Info about the
parameters and AD>
.
Probable Cause The configDownload process was initiated and completed successfully. The message string
describes the class of configuration parameters that were downloaded. If admin domain (AD) is
enabled, the AD number is specified in the description.
Recommended
Action
No action is required.
Severity INFO
CONF-1020
Message AUDIT, <timestamp>, [CONF-1020], INFO, CFG, <event-initiator-details>,
<event-location>, , configDownload not permitted
<AD Number if AD is
configured on the system>
.
Probable Cause There are several possible causes.
Recommended
Action
Check the error log to determine the cause. Correct the error and retry the configDownload
operation.
Severity INFO
CONF-1022
Message AUDIT, <timestamp>, [CONF-1022], WARNING, CFG, <event-initiator-details>,
<event-location>, , Downloading configuration without disabling the switch was
unsuccessful.
Probable Cause The system attempted to download a configuration without disabling the switch was unsuccessful
because there are one or more parameters that require the switch to be disabled.
Recommended
Action
Disable the switch using the switchDisable command and download the configuration.
Severity WARNING