Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

40 Fabric OS Message Reference
53-1000437-01
AUTH-1034
3
Probable Cause Indicates that an entity was not configured in the switch connection control (SCC) policy and tried
to connect to the port.
Recommended
Action
Add the entity's world-wide name (WWN) to the SCC policy and reinitialize authentication by using
the portDisable and portEnable commands or the switchDisable and switchEnable commands.
Severity ERROR
AUTH-1034
Message <timestamp>, [AUTH-1034], <sequence-number>,, ERROR, <system-name>, Failed to
validate name <entity name> in <authentication message>: port <port number>.
Probable Cause Indicates that the specified entity name in the payload is not in the correct format.
Recommended
Action
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable
and switchEnable commands.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR
AUTH-1035
Message <timestamp>, [AUTH-1035], <sequence-number>,, ERROR, <system-name>, Invalid <data
type> length in <message phase> message: length <data length>, port <port number>.
Probable Cause Indicates that a particular data field in the authentication message has an invalid length field. This
error usually relates to internal failure.
Recommended
Action
Usually this problem is transient. The authentication might fail.
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable
and switchEnable commands.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR
AUTH-1036
Message <timestamp>, [AUTH-1036], <sequence-number>,, ERROR, <system-name>, Invalid state
<state value> for <authentication phase>: port <port number>.
Probable Cause Indicates that the switch received an unexpected authentication message.
Recommended
Action
Usually this problem is transient. The authentication might fail.
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable
and switchEnable commands.