Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

Web Tools Administrator’s Guide 8-9

Publication Number: 53-0000194-01

To create a domain

1. Launch the Admin Domain module as described on page 8-6.

2. Click New in the toolbar.

The Create Admin Domain wizard launches.

Figure 8-4 Create Admin Domain Wizard

3. Assign a name using either the Auto Assigned or User Specified radio button.

4. Assign an Admin Domain ID using either the Auto Assigned or User Specified radio button.

5. Check the Active box to activate the Admin Domain when you finish creating it. This is the default

setting.

Uncheck the Active box to ensure the Admin Domain is deactivated when you finish creating it.

6. Click Next.

7. Assign members to the Admin Domain by selecting them in the Available Members section and

clicking Add, Add Ports, or Add Devices.

• Select a switch, port, or device in the Available Members tree and click Add to add the

selected element.

Alternatively, you can press the Insert key to add your selections.

• Select a switch or slot and click Add Ports to add all of the ports in the selected switch or slot.

• Select a switch, slot, or port and click Add Devices to add all of the devices for the selected

element.

Optional: Click the Manual button to add offline devices.

ote

You cannot auto-assign both the Admin Domain Name and Admin Domain ID. If you

auto-assign one element then the other must be user specified.