Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

9-10 Web Tools Administrator’s Guide
Publication Number: 53-0000194-01
9
Adding and Removing Members of a Zone Alias
Use the following procedure to add or remove zone alias members.
To modify the members of an alias
1. Launch the Zone Admin module as described on page 9-3.
2. Click the Alias tab.
3. Select the alias you want to modify from the Name drop-down menu.
4. Select an element in the Member Selection List that you want to add to the alias, or select an
element in the Alias Members list that you want to delete.
5. Click Add Member to add the selected alias member, or click Remove Member to remove the
selected alias member.
The alias is modified in the Zone Admin buffer. At this point you can either save your changes or
save and enable your changes.
6. Click Zoning Actions > Save Config Only to save the configuration changes.
To enable the configuration, see “Enabling Zone Configurations” on page 9-23.
Renaming Zone Aliases
Use the following procedure to change the name of a zone alias.
To rename a zone alias
1. Launch the Zone Admin module as described on page 9-3.
2. Click the Alias tab and select the alias you want to rename from the Name drop-down menu.
3. Click Rename.
The Rename an Alias dialog box appears.
4. Type a new alias name and click OK.
The alias is renamed in the Zone Admin buffer. At this point you can either save your changes or
save and enable your changes.
5. Click Zoning Actions > Save Config Only to save the configuration changes.
To enable the configuration, see “Enabling Zone Configurations” on page 9-23.