Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

9-16 Web Tools Administrator’s Guide
Publication Number: 53-0000194-01
9
Renaming QuickLoops
Use the following procedure to change the name of a QuickLoop.
To rename a QuickLoop
1. Launch the Zone Admin module as described on page 9-3.
2. Click the QuickLoop tab.
3. Select the QuickLoop you want to rename from the Name drop-down menu and click Rename.
The Rename a QuickLoop dialog box displays.
4. Type a new QuickLoop name and click OK.
The QuickLoop is renamed in the Zone Admin buffer. At this point you can either save your
changes or save and enable your changes.
5. Click Zoning Actions > Save Config Only to save the configuration changes.
To enable the configuration, see “Enabling Zone Configurations” on page 9-23.
Deleting QuickLoops
Use the following procedure to delete a QuickLoop.
To delete a QuickLoop
1. Launch the Zone Admin module as described on page 9-3.
2. Click the QuickLoop tab and select the QuickLoop you want to delete from the Name drop-down
menu.
3. Click Delete.
The Confirm Deleting QuickLoop dialog box opens.
4. Click Yes .
The selected QuickLoop is deleted from the Zone Admin buffer. At this point you can either save
your changes or save and enable your changes.
5. Click Zoning Actions > Save Config Only to save the configuration changes.
To enable the configuration, see “Enabling Zone Configurations” on page 9-23.