Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

Web Tools Administrator’s Guide 9-27
Publication Number: 53-0000194-01
9
3. Optional: Click Print to print the zone configuration summary.
This launches the print dialog box.
Figure 9-5 Zone Configuration Summary
Creating Configuration Analysis Reports
The configuration analysis report lists the following:
• SAN components (ports, WWNs, and AL_PAs) that are not included in the configuration.
• SAN components (ports, WWNs, and AL_PAs) that are in the configuration but not in the fabric.
To create a configuration analysis report
1. Launch the Zone Admin module as described on page 9-3.
2. Click the Zone Config tab.
3. Select a configuration to be analyzed from the Name drop-down menu and click Analyze Zone.
A dialog box displays, asking if you want to refresh the fabric before running the analysis.