Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

9-28 Web Tools Administrator’s Guide
Publication Number: 53-0000194-01
9
4. Click Yes or No.
The configuration analysis window displays.
Figure 9-6 Configuration Analysis Window
Displaying Zones Initiator/Target Accessibility
The Initiator/Target Accessibility Matrix shows a list of initiators and a list of targets and indicates
which initiator can access which target, as shown in Figure 9-7 on page 9-29.
To display a Zones Initiator/Target Accessibility Matrix
1. Launch the Zone Admin module as described on page 9-3.
2. Click the Zone Config tab.
3. Select a configuration to be analyzed for device accessibility from the Name drop-down menu.
4. Click Device Accessibility.
The Initiator/Target Accessibility Matrix for Config- Device Selection dialog box displays.
5. Select devices you want displayed in the accessibility matrix; click the radio button to select all
devices in the fabric or to select a subset of the devices.
If you select a subset, you must click the devices from the Select Devices list and click Add to
move them to the Evaluate for Accessibility list.