Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)
Web Tools Administrator’s Guide 10-5
Publication Number: 53-0000194-01
10
The labeling of axes in the graphs depends on the switch type.
• For the SilkWorm 24000 and 48000 directors, slot numbers are displayed with expansion arrows
next to them, as shown in Figure 10-1 on page 10-5. Click the arrows to expand and contract the list
of ports per slot.
• For the SilkWorm 200E, 3250, 3850, 3900, 4100, 4900, and 7500 switches, slot numbers are not
identified.
For the Switch Throughput Utilization graph, the X-axis depends on the switch type.
• For SilkWorm 24000 and 48000 directors, the X-axis scales up to 102.4 Gbit/sec in multiples of 2.
• For SilkWorm 200E, 3250, 3850, 3900, 4100, 4900, and 7500 switches, the X-axis scales up to 4.0
Gbit/sec in increments of 0.4 Gbps.
Port throughput utilization is represented by a horizontal bar for each selected port, which gets longer or
shorter depending on the percent utilization for that port at the last poll time. Thin short vertical
intersecting bars give a historical perspective by representing the highest and lowest values reached for
each selected port since the graph was opened. A third bar between them represents the average of all
values polled (see Figure 10-1).
Figure 10-1 shows how to access the list of Advanced Performance Monitoring graphs using Web
Tools. This example displays the graphs available in the Performance Monitor module for a
SilkWorm 24000 director with the Advanced Performance Monitoring license installed. Note that the
slot number is identified.
Figure 10-1 Accessing Performance Graphs