Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

10-10 Web Tools Administrator’s Guide
Publication Number: 53-0000194-01
10
Creating Advanced Performance Monitoring Graphs
This section describes how to create the advanced performance monitor graphs listed in Table 10-2 on
page 10-3. Because the procedure for creating these graphs differs depending on the type of graph, each
type is described separately in the sections that follow.
The advanced monitoring graphs are not supported for GbE ports.
Creating SID-DID Performance Graphs
The SID/DID Performance graph displays the traffic between a SID-DID pair on the switch being
managed.
To create an SID/DID performance graph
1. Launch the Performance Monitor module as described on page 10-7.
2. Click Performance Graphs > Advanced Monitoring > SID/DID Performance.
The SID/DID Performance Setup dialog box displays (see Figure 10-4 on page 10-11).
• To see which end-to-end (EE) monitors are currently set up on a particular port, proceed to
step 3.
• To specify the port, Source ID and Domain ID, skip to step 4.
N
ote
You must have an Advanced Performance Monitoring license installed to use the Advance Performance
Monitor features. If user-defined Admin Domains have been configured, Advanced Performance
Monitoring works only in AD255.