Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

10-14 Web Tools Administrator’s Guide
Publication Number: 53-0000194-01
10
To create an AL_PA error graph
1. Launch the Performance Monitor module as described on page 10-7.
2. Click Performance Graphs > Advanced Monitoring > ALPA Error.
The ALPA Error Setup dialog box displays (see Figure 10-6 on page 10-14).
3. Navigate to a switch > slot > port in the Slot/Port or Alpa Selection List.
4. Click the port from the Slot/Port Selection List or an AL_PA from the Slot/Port Selection List, and
drag it into the “Enter/drag slot,port” field. You can also manually type the slot and port number, in
the format slot,port.
5. Click OK.
The AL_PA Error graph displays on the canvas.
Figure 10-6 Creating an ALPA Error Graph
Managing Performance Graphs
This section provides the following procedures for managing performance graphs:
• “Saving Graphs to a Canvas” on page 10-14
• “Adding Graphs to a Canvas” on page 10-15
• “Printing Graphs” on page 10-15
• “Modifying Graphs” on page 10-16
Saving Graphs to a Canvas
Saving graphs is especially useful when you create customized graphs and do not want to re-create them
every time you access the Performance Monitor module.
When you save graphs, you must save them to a canvas. The following procedure describes how to save
graphs to a new canvas.