Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

10-16 Web Tools Administrator’s Guide
Publication Number: 53-0000194-01
10
3. Right-click anywhere in the graph and click Print.
The print dialog box displays.
4. Click OK.
To print all graphs in a canvas
1. Launch the Performance Monitor module as described on page 10-7.
2. Click File > Display Canvas Configurations.
The Canvas Configuration List displays. A message “No Canvas configuration to display” will
display if there are no saved canvas configurations.
3. Select a canvas from the list and click Load.
The graphs from that canvas are displayed in the Performance Monitor window.
4. Click File > Print All Graphs.
The print dialog box displays.
5. Click OK.
Modifying Graphs
Use the following procedure to modify an existing graph that is saved in a canvas.
To modify an existing graph
1. Launch the Performance Monitor module as described on page 10-7.
2. Click File > Display Canvas Configurations.
The Canvas Configuration List displays. A message “No Canvas configuration to display” displays
if there are no saved canvas configurations.
3. Select a canvas from the list and click Edit.
The Performance Monitor Canvas: Canvas Name dialog box displays.
4. Select a graph from the list and click Edit.
5. Make changes in the Edit dialog box, as necessary.
6. Click OK to close the Edit dialog box.
7. Click Save to save the changes and close the Performance Monitor Canvas dialog box.
8. Click Close to close the Canvas Configuration List.
N
ote
The Edit button is enabled only for the graphs that are configurable or editable.