Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

Web Tools Administrator’s Guide 15-9
Publication Number: 53-0000194-01
15
6. Enter the MTU size or accept the default MTU size and click Add.
Figure 15-4 IP Interface Configuration Subtab
To edit an IP Address
1. Launch the iSCSI Target Gateway Admin module as described on page 15-6.
2. Select the iSCSI Port tab.
3. From the left pane, select the GbE port that will be used.
4. Select the IP Interface tab.
5. Click Edit.
The following dialog box displays.
Figure 15-5 Warning Dialog Box