Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

Web Tools Administrator’s Guide 15-17
Publication Number: 53-0000194-01
15
To edit a discovery domain
1. Launch the iSCSI Target Gateway Admin module as described on page 15-6.
2. Select the Discovery Domains tab.
3. Select a DD in the left pane and click Edit.
4. Select DDs to add to or remove from the DDSet.
5. Click Next.
The opening screen with a list of virtual targets that you added to your DDs is displayed.
6. Click Next.
You can verify the virtual targets that you added to your DDs.
7. Click Finish.
You can confirm the changes that you made before committing them.
About Discovery Domain Sets (DDSet)
The iSCSI Target Gateway Admin module provides you with the flexibility to create discovery domain
sets (DDSet) that define the host target access. (This functionality is similar to Fibre Channel zoning.)
Use the Discovery Domains tab to view and manage access from iSCSI initiators to iSCSI virtual
targets.
The DD view displays all DDSets created and allows you to create, edit, enable, or disable a discovery
domain set. Select a DDSet from the left pane to view the contents of the set.
Discovery domains can be created but they do not have to be associated with a DDSet. However, a
DDSet cannot be created without having at least one discovery domain associated in it. Only floating
discovery domains are allowed.
N
ote
You cannot rename a discovery domain or discovery domain set.