HP StorageWorks SAN Switch 2/8V, 2/16V, 2/16N and 4/32 Installation Guide (AA-RVULC-TE, January 2005)

SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide 119
point-to-point
A fibre channel topology that employs direct links between each pair of
communicating entities.
port cage The metal casing extending out of the fibre channel port on the switch, and into which
a GBIC or SFP transceiver can be inserted.
Port_Name The unique identifier assigned to a fibre channel port. Communicated during login
and port discovery.
POST Power On Self-Test. A series of tests run by a switch after it is powered on.
primary FCS switch Primary fabric configuration server switch. The switch that actively manages the
configuration and security parameters for all switches in the fabric.
private loop An arbitrated loop that does not include a participating FL_Port.
private NL_Port An NL_Port that communicates only with other private NL_Ports in the same loop and
does not log into the fabric.
public device A device that supports arbitrated loop protocol, can interpret 8-bit addresses, and can
log into the fabric.
public loop An arbitrated loop that includes a participating FL_Port, and may contain both public
and private NL_Ports.
public NL_Port An NL_Port that logs into the fabric, can function within either a public or a private
loop, and can communicate with either private or public NL_Ports.
Q
quad A group of four adjacent ports that share a common pool of frame buffers.
R
R_A_TOV Resource allocation time-out value. The maximum time a frame can be delayed in the
fabric and still be delivered.
RAID Redundant Array Of Independent Disks. A collection of disk drives that appear as a
single volume to the server and are fault tolerant through mirroring or parity checking.
request rate The rate at which requests arrive at a servicing entity.
route As applies to a fabric, the communication path between two switches. May also
apply to the specific path taken by an individual frame, from source to destination.
routing The assignment of frames to specific switch ports, according to frame destination.
RR_TOV Resource recovery time-out value. The minimum time a target device in a loop waits
after a LIP before logging out a SCSI initiator.