32 Installation Guide (AA-RVULC-TE, January 2005)

SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide 13

Equipment symbols

The following equipment symbols may be found on hardware for which this guide pertains.

They have the following meanings.

Any enclosed surface or area of the equipment marked with these symbols

indicates the presence of electrical shock hazards. Enclosed area contains no

operator serviceable parts.

WARNING: To reduce the risk of personal injury from electrical shock hazards, do

not open this enclosure.

Any RJ-45 receptacle marked with these symbols indicates a network interface

connection.

WARNING: To reduce the risk of electrical shock, fire, or damage to the

equipment, do not plug telephone or telecommunications connectors into this

receptacle.

Any surface or area of the equipment marked with these symbols indicates the

presence of a hot surface or hot component. Contact with this surface could result

in injury.

WARNING: To reduce the risk of personal injury from a hot component, allow the

surface to cool before touching.

Power supplies or systems marked with these symbols indicate the presence

of multiple sources of power.

WARNING: To reduce the risk of personal injury from electrical shock,

remove all power cords to completely disconnect power from the power

supplies and systems.

Any product or assembly marked with these symbols indicates that the component

exceeds the recommended weight for one individual to handle safely.

WARNING: To reduce the risk of personal injury or damage to the equipment,

observe local occupational health and safety requirements and guidelines for

manually handling material.