32 Installation Guide (AA-RVULC-TE, January 2005)

33SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide

Table 6 SAN Switch shipping carton contents checklist

Item Number Description

One SAN Switch Accessories Box containing:

• One 10 ft. (3.0 m.) RS-232 serial cable; convertable to

an RJ-45 connector by removing the adapter on the

end of the cable

• One SAN Switch Rack Mount Kit hardware pouch:

• (10) #8-32 x 3/16-inch Phillips pan-head screws

with thread lock for the SAN Switch 4/32 only

• (14) #8-32 x 5/16-inch pan-head SEMS screws

for use with the SAN Switch 2/8V, SAN Switch

2/16V and SAN Switch 2/16N

• (10) #10-32 x 1/2-inch Phillips pan-head screws

with captive star lock washers

• (8) #10 alignment washers

• (8) #10 adapter washers

• (2) 1/4-20 hex nut with captive star lock washers

• (2) 1/4-inch flat washers

• Four Rubber feet for mounting on a flat surface,

(i.e., a laboratory bench).

• One HP StorageWorks SAN Switch Software CD,

One set of HP StorageWorks product documentation

including

HP StorageWorks SAN Switch 2/8V,

2/16V, 2/16N and 4/32 installation guide

(this

guide), Safety Guides, User License and Warranty

• For the SAN Switch 2/8V, one country-specific AC

power cord, and one PDU power cord (not shown).

For the SAN Switch 2/16V, 2/16N and 4/32, two

AC power cords and two PDU power cords (not

shown).

SAN Switch Rack Mount Kit rail assemblies:

• (2) rear mounting brackets

• A right inner rail and a right outer rail

• A left inner rail and a left outer rail

One HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V,

SAN Switch 2/16N or SAN Switch 4/32