32 Installation Guide (AA-RVULC-TE, January 2005)

41SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide

• For an HP System/e rack, install each of the two rear mounting brackets with (2) #10-32 x

1/2-inch Phillips pan-head screws and (2) #10 alignment washers as shown in Figure 8.

Figure 8 Installing the rear mounting brackets (HP System/e rack-left rear upright)

NOTE: This kit contains both left rails and right rails. The rails are marked Right and Left.