32 Installation Guide (AA-RVULC-TE, January 2005)

43SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide

b. Depending on the rack you are using, complete one of the following tasks:

• For an HP 10,000 series, install two #10-32 x 1/2-inch Phillips pan-head screws

with captive star lock washers and two #10 adapter washers in the upper and

lower hole locations of the right rail. Then install two #10-32 x 1/2-inch Phillips

pan-head screws with captive star lock washers and two #10 adapter washers in

the upper and lower hole locations of the left rail. See Figure 10.

Figure 10 Assembling the outer rails (HP 10,000 series)