32 Installation Guide (AA-RVULC-TE, January 2005)

Installing and configuring46

8. Verify that a plenum is installed on the SAN Switch 2/8V, SAN Switch 2/16V or SAN

Switch 2/16N models only, as shown in Figure 12. The plenum is an overlay that

dissipates the heat generated by the switch, preventing overheating.

NOTE: The plenum is a required part of this installation for SAN Switch 2/8V, SAN Switch

2/16V or 2/16N models only, when installed in HP 10,000 series, or System/e racks.

Figure 12 Securing the inner rails to the SAN Switch 2/8V with plenum

The components in Table 12 include:

Plenum

2 Switch

0013a