32 Installation Guide (AA-RVULC-TE, January 2005)

49SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide

11.Insert the switch into the rack and install (2) #10-32 x 1/2-inch Phillips pan-head screws

with captive star lock washers with one on each side. See Figure 15 and Figure 16.

Figure 16 Installing the switch into a rack (HP System/e rack)

12.Tighten the nuts installed in step 4 on page 42. See Figure 9 on page 42.

NOTE: To uninstall a switch, remove the middle #10-32 x 1/2-inch Phillips pan head screw

with captive star lock washer from either side of the rack uprights.