HP StorageWorks SAN Switch 2/8V, 2/16V, 2/16N and 4/32 Installation Guide (AA-RVULC-TE, January 2005)

55SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide
Creating an Ethernet connection
Use these steps to create an Ethernet connection.
1. Connect an Ethernet cable to the Ethernet port and to the workstation or to an Ethernet
network containing the workstation as shown in Figure 19.
NOTE: Figure 19 shows the SAN Switch 2/16V. This procedure is the same for all SAN
Switches.
Figure 19 Connecting the Ethernet cable to the SAN Switch 2/16V
Once the Ethernet cable is connected, access the switch remotely, via the CLI or the built-in
Advanced Web Tools GUI software.
2. Log in to the switch by telnet, using the admin account.
0016a
IOIOI
1
0
0
-
2
4
0
100-240
VAC
1
.0
A
4
7
-6
3
H
z
C 1.0A 47-63Hz
1
0
0
-
2
4
0
100-240
VAC
1
.0
A
4
7
-6
3
H
z
C 1.0A 47-63Hz
!