32 Installation Guide (AA-RVULC-TE, January 2005)

Installing and configuring60

Refer to the tsTimeZone command in the

HP StorageWorks command reference guide

for more

detailed information about the command parameters. All supporting Fabric OS documentation

resides on the Software CD that shipped with your switch.

3. Repeat Steps 1 and 2 on all switches for which the time zone needs to be set.

This needs to be done only once, because the value is stored in nonvolatile memory.

For U.S. time zones, see Table 9 to determine the correct parameter for the tsTimeZone

command.

Table 9 tsTimeZone command parameter selection

Local Time tsTimeZone parameter

Atlantic Standard -4,0

Atlantic Daylight -3,0

Eastern Standard -5,0

Eastern Daylight -4,0

Central Standard -6,0

Central Daylight -5,0

Mountain Standard -7,0

Mountain Daylight -6,0

Pacific Standard -8,0

Pacific Daylight -7,0

Alaskan Standard -9,0

Alaskan Daylight -8,0

Hawaiian Standard -10,0