32 Installation Guide (AA-RVULC-TE, January 2005)

67SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide

SAN Switch 2/8V, 2/16V and 2/16N LED

patterns

Table 13, Table 14 and Table 15 summarize LED location, color, and recommended action.

System and power LED patterns

The system and power LED patterns are shown in Table 13.

Table 13 System LED patterns during normal operation

LED name,

location

LED color Status of hardware Recommended action

System Status

and Power

Status

At right of

serial port on

bottom

No light Switch is off, boot is not

complete, or boot failed.

Verify that switch is on and has

completed booting.

Steady green Switch is on and power supplies

are functioning properly.

No action required.

Slow-flashing

green

(on 1 second,

off 1 second)

One or both of the following are

true:

One or more environmental

ranges are exceeded.

Error log contains one or more

port diagnostic error messages.

Check environmental

conditions, error log, Port

Status LEDs, transceivers,

cables, and loopback plugs.

Correct error condition.

Clear error log.

Rerun diagnostics to verify fix.

Amber One failed power supply in the

SAN Switch 2/16V

No action required, but failure

of the remaining power supply

will cause the switch to fail.