HP StorageWorks SAN Switch 2/8V, 2/16V, 2/16N and 4/32 Installation Guide (AA-RVULC-TE, January 2005)

69SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide
Ethernet LED patterns
Each Ethernet port has two LEDs, described in Table 15.
Port Status
cont’d
Fast-flashing
amber
(on 1/4 second,
off 1/4 second
Port is faulty. Check the Port Status LEDs,
error log, transceiver, and cable
or loopback plug.
Clear the error log.
Rerun the diagnostics to verify
that the error condition is fixed.
Alternating
green and
amber
Port is bypassed. Check configuration of Fibre
Channel loop.
Port Speed
Below ports on
right
No light Port is transmitting/receiving at
1 Gb/sec.
No action required.
Steady green Port is transmitting/receiving at
2 Gb/sec.
No action required.
Table 14 Port LED patterns during normal operation (continued)
LED name,
location
LED color Status of hardware Recommended action
Table 15 Ethernet LED patterns
LED name,
location
LED color Status of hardware Recommended action
Ethernet speed
Below port on
right
No light
Steady green
Port speed is 10 Mb/sec
Port speed is 100 Mb/sec
No action required.
Ethernet link
Below port on
right
Amber
Blinking green
Link is valid
traffic
No action required.