32 Installation Guide (AA-RVULC-TE, January 2005)

Installing field-replaceable units80

Replacing the SAN Switch 4/32 power supply

The SAN Switch 4/32 uses two power supplies, as shown in Figure 24. The Fabric OS

identifies the power supplies from left to right on the nonport side as PS2 (on the left) and PS1

(on the right).

Figure 24 SAN Switch 4/32 power supplies on the nonport side

Table 20 lists the SAN Switch 4/32 nonport side LEDs.

Table 20 SAN Switch 4/32 nonport side LEDs

Number Description

1 Power supply 2 status LED

2 Power supply 2

Scale: 1/8" = 1"

MRO25014a

421