32 Installation Guide (AA-RVULC-TE, January 2005)

81SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide

CAUTION: Disassembling any part of the power supply voids the part warranty and

regulatory certifications. There are no user-serviceable parts inside the power supply.

Table 21 describes the power supply status LEDs and corrective actions.

3 Power supply 1 status LED

4 Power supply 1

Table 20 SAN Switch 4/32 nonport side LEDs (continued)

Number Description

Table 21 Power supply status LEDs

LED behavior Meaning Correction action

No light The power supply is not receiving

power or is off.

Verify that the power supply is on and

seated and that the power cord is

connected to a functioning power source.

Steady green Power supply is operating normally. No action required.

Steady amber for more

than five seconds

Power supply fault for one of the

following reasons:

• Power cable is disconnected

• Power supply is off

• Power supply has failed

Try the following:

• Check the power cable connection.

• Verify that the power supply is

powered on.

• Replace the power supply.