32 Installation Guide (AA-RVULC-TE, January 2005)

91SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide

A Regulatory compliance notices

This appendix covers the following topics:

• FCC EMC statement (USA), page 91

• EMC statement (Canada), page 92

• EMC statement (European Union), page 92

• European union notice, page 92

• Germany noise declaration, page 92

• VCCI EMC statement (Japan), page 93

• Japanese power cord statement, page 93

• RRL EMC statement (Korea), page 94

• Laser safety, page 95

• Battery replacement notice, page 96

FCC EMC statement (USA)

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference, in which case the user will be required to correct the

interference at personal expense. The end user of this product should be aware that any

changes or modifications made to this equipment without the approval of Hewlett-Packard

could result in the product not meeting the Class A limits, in which case the FCC could void the

user's authority to operate the equipment.

The Regulatory Series Number for the SAN Switch 2/8V, SAN Switch 2/16V and SAN Switch

2/16N is HSTNM-N001.

The Regulatory Series Number for the SAN Switch 4/32 is HSTNM-N003.