HP StorageWorks SAN Switch 2/8V, 2/16V, 2/16N Fabric OS V4.2.X Release Notes

Important Notes
12 SAN Switch 2/8V, 2/16V, 2/16N Fabric OS 4.2.x Release Notes
Firmware: Fabric OS v2.6.2, v3.1.2, or
v4.2.x
Operating System: Any supported
operating system (with supported
browser)
Browser: Any supported browser (on a
supported operating system)
The Name Server table does not display properly for
a switch running firmware versions earlier than Fabric
OS v2.6.2, v3.1.2, or v4.2.x.
Workaround: If Secure mode is enabled, select a
switch running Fabric OS v2.6.2, v3.1.2, or v4.2.x or
later as the primary FCS switch. If Secure mode is not
enabled, use a launch switch running Fabric OS
v2.6.2, v3.1.2, or v4.2.x or later to access the Name
Server table on the switch.
Firmware: Earlier than Fabric OS v2.6.2,
v3.1.2, or v4.2.x
Operating System: Solaris
Browser: Netscape
Any switches running Fabric OS v2.6.2, v3.1.2, or
v4.2.x or later are unsupported through Netscape.
Workaround: Netscape is not a supported browser
for switches running Fabric OS v2.6.2, v3.1.2, or
v4.2.x or later. Use Mozilla browser to manage all of
your switches from a Solaris operating system. See
Table 1 for supported browsers.
Firmware: Earlier than Fabric OS v2.6.1,
v3.0.x, or v4.0.x
Operating System: Windows
Browser: Internet Explorer
When you are running Fabric View, the browser
crashes.
Workaround: Use a launch switch that runs Fabric OS
versions v2.6.1, v3.0.x, or v4.0.x or later so that you
can use Switch Explorer (instead of Fabric View).
Limitations Using Mixed OS Versions
Table 2 lists possible limitations when running different OS versions.
Table 2: Limitations Using Mixed OS Versions (Continued)
Launch Switch Environment Issue and Workaround