16N Installation Guide, V4.2.X (AA-RVULB-TE, April 2004)

Installing the SAN Switch

26 SAN Switch 2/8V, 2/16V and 2/16N Installation Guide

Items Included with the SAN Switch 2/8V, 2/16V and 2/16N

The following items are included with the standard shipment of the SAN Switch

2/8V, 2/16V and SAN Switch 2/16N. When you open the product packaging,

verify that these items are included in the package and that no damage has

occurred during shipping:

■ One SAN Switch 2/8V, SAN Switch 2/16V or SAN Switch 2/16N includes:

— One cabinet-mountable 1U chassis designed to be mounted in a 19 inch

cabinet space, with forced-air cooling that flows from the non-port side of

the switch to the port side.

— 8 or 16 Fibre Channel ports, compatible with SFP transceivers, SWL and

LWL.

— One RS-232 serial port (DB-9 connector).

— One IEEE-compliant RJ-45 connector for use with 10/100 Mbps Ethernet

or in-band.

— LEDs as described in “LED Location” on page 60.

— The SAN Switch 2/8V comes with one fixed power supply and built-in

fans. The SAN Switch 2/16V comes with two fixed power supplies and

built-in fans.

— A real-time clock (RTC) with a 10-year battery.

— Plenum, part number 5697-4919

■ An accessory kit containing:

— One or two grounded 6 ft. (1.8 m.) country-specific power cords,

depending on the number of power supplies installed in the switch.

— One or two grounded 10 ft. (3.0 m.) PDU power cords depending on the

number of power supplies installed in the switch.

— One 10 ft. (3.0 m.) RS-232 serial cable; if necessary, convert this RS-232

cable to an RJ-45 connector by removing the adapter on the end of the

cable.

— One HP StorageWorks SAN Switch Rack Mount Kit, with instructions.

—The HP StorageWorks SAN Switch 2/8V and 2/16V Installation Guide

(this document).