16N Installation Guide, V4.2.X (AA-RVULB-TE, April 2004)

Installing the SAN Switch

39SAN Switch 2/8V, 2/16V and 2/16N Installation Guide

a. Attach the left outer rail and the right outer rails to the rear mounting

brackets using (2) 1/4-20 hex nuts with captive star lock washers attached

loosely as shown in Figure 7. Don’t tighten them. The nuts will be

tightened later in step 8 on page 46.

Figure 7: Installing the outer rails (HP 10000 series or comparable EIA cabinet)