16N Installation Guide, V4.2.X (AA-RVULB-TE, April 2004)

Installing the SAN Switch

40 SAN Switch 2/8V, 2/16V and 2/16N Installation Guide

b. Depending on the rack you are using, complete one of the following tasks:

— For an HP 10000 series or comparable EIA cabinet, install two #10-32 x

1/2-inch Phillips pan-head screws with captive star lock washers and two

#10 adapter washers in the upper and lower hole locations of the right rail.

Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive

star lock washers and two #10 adapter washers in the upper and lower

hole locations of the left rail. See Figure 8.

Figure 8: Assembling the outer rails (HP 10000 series or comparable EIA cabinet)