16N Installation Guide, V4.2.X (AA-RVULB-TE, April 2004)

Installing the SAN Switch

41SAN Switch 2/8V, 2/16V and 2/16N Installation Guide

— For an HP System/e cabinet, install two #10-32 x 1/2-inch Phillips

pan-head screws with captive star lock washers and two #10 alignment

washers in the upper and lower hole locations of the right rail. Then install

two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock

washers and two #10 alignment washers in the upper and lower hole

locations of the left rail. See Figure 9.

Figure 9: Assembling the outer rails (HP System/e cabinet)