16N Installation Guide, V4.2.X (AA-RVULB-TE, April 2004)

Installing the SAN Switch

45SAN Switch 2/8V, 2/16V and 2/16N Installation Guide

Note: This step applies to both the HP 10000 series, System/e cabinet or comparable

EIA cabinets.

Figure 12: Installing the switch into a rack (HP 10000 series or comparable EIA

cabinet)

Insert the switch into the rack and install (2) #10-32 x 1/2-inch Phillips

pan-head screws with captive star lock washers with one on each side. See

Figure 12 and Figure 13.