16N Installation Guide, V4.2.X (AA-RVULB-TE, April 2004)

Technical Specifications

91SAN Switch 2/8V, 2/16V and 2/16N Installation Guide

Power Supply Specifications

The power supplies are universal and capable of functioning worldwide without

using voltage jumpers or switches. They meet IEC 61000-4-5 surge voltage

requirements and are autoranging in terms of accommodating input voltages and

line frequencies. Each power supply has its own built-in fan for cooling, pushing

the air toward the port side of the switch. Power supplies are not removable.

Table 15 lists the power supply specifications.

Table 15: Power Supply Specifications

Specification Value

Outlet Correctly wired and earth-grounded

Maximum output from each power

supply

SAN Switch 2/8V: 50 watts, with fans

operating

SAN Switch 2/16V: 75 watts, with fans

operating

Maximum system power

consumption

90 - 264 watts (depending on transceiver

vendor)

Input voltage 100 - 240 VAC (nominal 80% efficiency),

autoranging

Input line frequency 47 - 63 Hz

Harmonic distortion Active power factor correction per

IEC1000-3-2

BTU rating SAN Switch 2/8V: 120 BTU

SAN Switch 2/16V: 266 BTU

Inrush current SAN Switch 2/8V: 20A

SAN Switch 2/16V: 25A, each line input

Input line protection Fused in both hot and neutral lines