Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

8-6 Fabric Manager Administrator’s Guide
Publication Number: 53-1000196-01-HP
Enabling Performance Monitoring
8
To enable performance monitoring
1. Select the fabric in the View Panel and select Tasks > Performance Monitoring > Configuration
from the Menu Bar.
The Performance Monitoring Configuration dialog displays, as shown in Figure 8-2.
Figure 8-2 Configuring Performance Monitoring
2. To collect end-to-end statistics, click On in the End-to-End Monitors section.
To collect switch port transmit and receive data, click On in the Port Rx/Tx History section.
3. Click Save.
4. Optional: Select View Set Monitors to see the list of devices that are being monitored.
The End-to-End View Set Monitors dialog displays (see Figure 8-3). This table lists all the device
pairs (initiators and targets) that are being monitored. This list is useful if there is a resource
limitation or license issue and all possible conversations are not being monitored. The monitors that
could not be set are listed within the Not Set Monitors tab.
Figure 8-3 Viewing the End-to-End Monitors that are Set/Not Set