Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

Fabric Manager Administrator’s Guide 10-3

Publication Number: 53-1000196-01-HP

Configuring Call Home

Each call home configuration you create acts independently without impacting any other configuration.

If you set up a call home configuration to send an email message, you need to also set up the notification

parameters. See “Configuring Notification Parameters” on page 7-13 for instructions on setting the

notification parameters for call home and change management. If you have not already set up the

notification parameters, the Call Home Configuration wizard prompts you to do so.

If you set up a call home configuration to capture supportSave or supportShow information, you must

configure the FTP parameters before configuring call home. See “Configuring File Transfer Options”

on page 14-9 for instructions on configuring the FTP server.

To set up a call home configuration

1. Click Tasks > Call Home > Create or Edit configuration.

The Call Home window displays, as shown in Figure 10-1.

Figure 10-1 Call Home Dialog

2. Click Add.

The Call Home Configuration wizard is launched (see Figure 10-2 on page 10-4).