Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

11-6 Fabric Manager Administrator’s Guide
Publication Number: 53-1000196-01-HP
Opening a Telnet Session for a Nonsecure Switch
11
The Time dialog displays (see Figure 11-5).
Figure 11-5 Time Dialog
3. To adjust the time or date, click the applicable areas in the Time dialog (day-of-week, month, day,
year, hour, minute, second, AM or PM) and use the up and down arrows to change the values; then
click OK.
Opening a Telnet Session for a Nonsecure Switch
The following procedure describes how to open a telnet session for a nonsecure switch, that is, a switch
without secure mode enabled. See “Using Telnet on a Secure Fabric” on page 17-19 for instructions on
opening a telnet session for a secure fabric.
To open a telnet session for a nonsecure switch
1. Right-click a nonsecure switch and select Telnet from the context menu.
The telnet prompt is displayed.
2. Log in using telnet.
Enabling/Disabling Switches and Ports
You can use Fabric Manager to quickly enable or disable a port, a switch, or multiple ports and switches
across multiple fabrics.
Note
A disabled port on an FC router is both disabled and stopped. An enabled FC router port is both enabled
and started.