Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

12-2 Fabric Manager Administrator’s Guide
Publication Number: 53-1000196-01-HP
Managing Passwords
12
3. Enable switch passwords to be saved to the server by checking the Persist switch passwords
checkbox.
Disable switch passwords from being saved to the server by unchecking the box.
4. Click OK.
Changing Admin Password on Multiple
Switches
This section describes how you can set the password for accounts with the role of admin, which
includes the default admin account as well as non-default user accounts that have the admin role. You
can change the password on a single switch or on multiple nonsecure switches simultaneously. Other
accounts with administrator-level privileges, such as “root” or “factory”, are excluded. You cannot use a
RADIUS server for authentication on a selected switch.
You cannot set the “admin” account password on any switches in secure mode. See “Changing the
Admin Security Password” on page 17-15 for information about using passwords in secure fabrics.
To set the “admin” account password on multiple switches
1. Select Tasks > Switch Management > Set Admin Password from the Menu bar.
The Set “admin” Account Passwords dialog displays.
2. From the SAN Elements tab, select the switches or fabrics for which you want to change the admin
password, and click the right arrow to move them to the Selected Switches panel.
You can also drag fabrics or switches from the SAN Elements tab directly into the Selected
Switches panel.
3. Type the new admin password in the New Password field.