Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

Fabric Manager Administrator’s Guide 13-3
Publication Number: 53-1000196-01-HP
Viewing iSCSI Information
13
iSCSI Summary
The iSCSI Summary tab, shown in Figure 13-2, displays a summary of iSCSI-specific parameters as
well as a table of information about iSCSI-capable switches.
The information shown is in the context of user selection. If you made no selection, the information is
SAN-wide; if you selected a fabric, the information is fabric-wide, and if you selected a switch, the
information is specific to that switch. Because virtual targets are fabric-wide entities, if you click this
tab in the switch context, the value for No. of iSCSI Targets is N/A.
To view additional iSCSI-specific details about a switch, right-click a switch in the table and click
iSCSI Configuration in the context menu. This launches the Web Tools iSCSI Target Gateway Admin
module, from which you can view and configure iSCSI parameters (see “Setting Up iSCSI Target
Gateway Services” on page 13-7).
To configure Discovery Domain and Discovery Domain Sets, right-click a switch in the table and click
Configure DD/DDSet in the context menu. This launches the Web Tools iSCSI Target Gateway Admin
module, from which you can configure and edit the DD and DDSet details (see “Setting Up iSCSI
Target Gateway Services” on page 13-7).
iSCSI Ports
The iSCSI Ports tab, shown in Figure 13-3, lists the iSCSI (GbE) ports in an iSCSI-capable SAN,
fabric, or switch. This tab shows only the GbE ports on FC4-16IP port blades. The portal IP is shown as
N/A for non-configured GbE ports. You can filter the list based on portal IP and switch IP addresses.
Figure 13-3 iSCSI Tab, iSCSI Ports View
To modify an existing port configuration, right-click a port in the table and click Configure iSCSI
Ports in the context menu. This launches the Web Tools iSCSI Target Gateway Admin module, from
which you can view and configure iSCSI ports (see “Setting Up iSCSI Target Gateway Services” on
page 13-7).
To view details about an existing iSCSI port configuration, right-click a port in the table and click
iSCSI Port Detail View in the context menu. The port details are displayed in a pop-up window, as
shown in Figure 13-4.