Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

Fabric Manager Administrator’s Guide 13-5
Publication Number: 53-1000196-01-HP
Viewing iSCSI Information
13
iSCSI Targets
The iSCSI Targets tab, shown in Figure 13-6, lists all iSCSI targets (virtual targets) in the SAN, fabric,
or switch. You can filter the list based on iSCSI target name (IQN) and FC target name. This tab is
disabled in the switch context because virtual targets are fabric-wide entities.
Figure 13-6 iSCSI Tab, iSCSI Targets View
If an iSCSI target is created from LUNs of multiple FC devices, there are multiple entries for that iSCSI
target corresponding to each FC device. If an iSCSI target has multiple LUN configurations from a
single FC device, there is only one entry for that iSCSI target.
The state of the iSCSI target is offline if any of the FC devices that are part of the iSCSI target are
offline.
To edit an iSCSI target, right-click the target in the table and click Configure iSCSI Targets in the
context menu. This launches the Web Tools iSCSI Target Gateway Admin module, from which you can
view and configure iSCSI targets (see “Setting Up iSCSI Target Gateway Services” on page 13-7).
Virtual Initiators
The Virtual Initiators tab, shown in Figure 13-7, lists the virtual initiators available in the SAN, fabric,
or switch. You can filter the list based on virtual initiator name and switch name.