Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

14-2 Fabric Manager Administrator’s Guide
Publication Number: 53-1000196-01-HP
Determining Availability of Firmware-Specific Features
14
FTP server and firmware
repository
XXXXXXXXXX
FICON XXXXX
FICON-CUP XXXX
Cascaded FICON
3
X
Performance Monitoring (port
statistics)
XXXXX
4
XX
Performance Monitoring (end-
to-end)
5
XXXXX
4
XX
QuickLoop
6
XXX
Fibre Channel Router XX X
FCIP XX
Change Management
configuration checking
7
XX
supportShow information in
Fabric Manager
XXXXXX X X
supportSave information in
Fabric Manager
X
Replicate authentication,
authorization, and accounting
(AAA) configuration
XXXX
Role-based access control
(RBAC)
X
Administrative Domains X
Offline zone management
8
XXXX
iSCSI management X
ACL management X
Trace Route
9
X
1. XPath OS v7.1.2c and higher is required for LSAN view support.
2. Topology/ISL monitoring is supported on Fabric OS v2.6.0k or higher and Fabric OS v3.0.2k or higher.
3. All switches in the fabric must be running Fabric OS v5.2.0 or higher
4. Performance Monitoring port statistics return incorrect values for Fabric OS v4.x to 4.2.0b. Firmware versions v4.2.0c or higher work
correctly.
5. The seed switch must be running Fabric OS v3.x/4.x or higher for End-to-End Performance Monitoring to be enabled.
6. The QuickLoop feature can be implemented only on switches running Fabric OS v2.x/3.x; however, when using a seed switch running
Fabric OS v4.x, you can see the Fabric OS v2.x/3.x switches in QuickLoops.
Table 14-1 Firmware-Specific Features (Continued)
Feature Fabric OS XPath OS
5.2.x 5.1.x 5.0.x 4.4.x 4.2.x 4.1.x 4.0.x 3.1.x 3.0.x 2.6.x 7.3.x 7.1.x