Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

Fabric Manager Administrator’s Guide 17-3

Publication Number: 53-1000196-01-HP

Using the Policy Editor

Figure 17-2 Select Security Policy Settings (Optional)

Using the Policy Editor

The Policy Editor allows you to view and configure your security policy settings.

When you launch the Policy Editor (shown in Figure 17-3 on page 17-4), the Summary tab displays by

default. The Summary tab displays the defined and active security policies in two panels.

• The Defined Policy Set panel lists the currently defined policies (active and inactive) in the selected

fabric. You can define a policy and then save it with or without activating it.

• The Active Policy Set panel lists the currently active policies. This panel is informational only.

To make changes to a policy, click the tab for that policy and make the changes. Then click the

Summary tab to view the changes in the Defined Policy Set panel. The changes are not saved until you

click Save. The changes are not activated unless you click Activate. If you click Activate, all policies

in the Defined Policy Set panel are activated.

You can use the Policy Editor for the following tasks:

• “Configuring FCS Policy Options” on page 17-4

• “Configuring SCC Policy Options” on page 17-6

• “Configuring Telnet, RSNMP, WSNMP, HTTP, and API Policy Options” on page 17-7

• “Configuring DCC Policy Options” on page 17-9

• “Configuring SES and MS Policy Options” on page 17-11

• “Configuring Serial and Front Panel Policy Options” on page 17-13

• “Changing the Admin Security Password” on page 17-15

• “Configuring No-Node WWN Zoning” on page 17-17