Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

Fabric Manager Administrator’s Guide 17-5
Publication Number: 53-1000196-01-HP
Using the Policy Editor
17
Figure 17-4 Configuring the FCS Policy
3. Select a switch from the Available Switch List and click Add FCS to add the switch to the FCS
Switch List, or click Add All to add all of the switches in the current fabric simultaneously.
To add a switch that is not listed in the Available Switch List, click Add Others, and type the
WWN of the switch you want to add.
To remove a switch from the FCS policy, select the switch from the FCS Switch List, then click
Remove FCS.
You can arrange the order of the switches in the FCS Switch List using the up/down arrow keys.
The primary FCS switch is the first switch in the list and is also identified with a star icon next to it.
4. Click the Summary tab.
5. Click Save to save your changes but not apply them, or click Activate to save and apply your
changes.
The Security Policy Review dialog displays.
6. After reviewing the Security Policy, click one of the following:
• Continue (to continue applying your changes)
• Cancel (to cancel your changes)
• Copy to File (to copy the Security Policy to a file)
Note
Changing the primary FCS causes updates in the fabric that might take time to complete,
depending on the fabric size.