Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

17-6 Fabric Manager Administrator’s Guide
Publication Number: 53-1000196-01-HP
Using the Policy Editor
17
Configuring SCC Policy Options
The SCC policy defines all switches in the secure fabric (FCS and non-FCS). You cannot add a new
switch to a secure fabric without adding the switch to the SCC policy. SCC policies are created
automatically in Fabric Manager when you enable secure mode on a fabric.
To configure/edit the SCC policy
1. In the Information Panel, right-click the secure fabric for which you want to set policies and choose
Security > Security Policy Editor from the context menu.
The Policy Editor appears (see Figure 17-3 on page 17-4).
2. Click the SCC tab (see Figure 17-5).
All current switches in the fabric display in the Available Switches list.
Figure 17-5 Configuring the SCC Policy
3. Select a switch that you want to include in the SCC policy and click Add Switch, or click Add All
to add all switches from the fabric into the policy.
To add a switch that is not listed in the Available Switch list, click Other, and type the WWN of the
switch you want to add.
To remove a switch from the SCC policy, select the switch from the Fabric Switches list, then click
Remove Switch.
To delete the policy, click Delete Policy.
Note
All switches within a fabric must be included in the SCC policy or else the excluded
switches segment out into their own fabric.