Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

17-10 Fabric Manager Administrator’s Guide
Publication Number: 53-1000196-01-HP
Using the Policy Editor
17
Figure 17-7 Configuring the DCC Policy
3. Click Create Policy.
The Enter DCC Policy dialog box displays.
4. Type a name for the new policy in the Enter Policy Name field and click Create in the Enter DCC
Policy dialog.
The new name is displayed in the Policy menu within the DCC tab.
5. (Optional) Click Name, IP, or WWN to change how the switches and devices are displayed in the
Available Switches and Devices list.
6. Select a switch or device WWN from the Switches and Devices tab to add to the policy, and then
click Add Member.
To add a WWN that is not displayed, click Add Device WWN and type the WWN you want to add.
7. Click the Summary tab.
8. Click Save to save your changes but not apply them, or click Activate to save and apply your
changes.
The Security Policy Review dialog displays.
9. After reviewing the Security Policy, click one of the following:
• Continue (to continue applying your changes)
• Cancel (to cancel your changes)
• Copy to File (to copy the Security Policy to a file)