Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

Fabric Manager Administrator’s Guide 17-11
Publication Number: 53-1000196-01-HP
Using the Policy Editor
17
To make changes to existing DCC policies
1. In the Information Panel, right-click the secure fabric for which you want to set policies and choose
Security > Security Policy Editor from the context menu.
The Policy Editor appears (see Figure 17-3 on page 17-4).
2. Click the DCC tab (see Figure 17-7 on page 17-10).
3. Perform any of the following actions for each DCC policy:
• To remove a DCC policy, click Policy > Policy Name You want to delete and click Delete
Policy.
• To rename a DCC policy, click Policy > Policy Name You want to rename and click Rename
Policy.
• To change the contents of a DCC policy, click Policy > Policy Name you want to edit, then...
- Select a switch or device WWN from the Switches and Devices tab to add to the policy,
and click Add Member.
- To add a WWN that is not displayed, click Add Device WWN and type the WWN you
want to add.
4. Click the Summary tab.
5. Click Save to save your changes but not apply them, or click Activate to save and apply your
changes.
The Security Policy Review dialog displays.
6. After reviewing the Security Policy, click one of the following:
• Continue (to continue applying your changes)
• Cancel (to cancel your changes)
• Copy to File (to copy the Security Policy to a file)
Configuring SES and MS Policy Options
Create an SES policy to allow device ports to access switches using the SES protocol. With Fabric
Manager, you can create and configure multiple SES policies with unique names and populate SES
policies with switch and device WWNs.
Create an MS policy to allow trusted fabric-connected devices to access the Management Server. With
Fabric Manager, you can create and configure multiple MS policies with unique names and populate
MS policies with switch and device WWNs.
SES and MS policies are both device-based.
To create an SES or MS policy
1. In the Information Panel, right-click the secure fabric for which you want to set policies and choose
Security > Security Policy Editor from the context menu.
The Policy Editor appears (see Figure 17-3 on page 17-4).
2. Click the tab that corresponds to the policy you want (SES or MS).