Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

17-12 Fabric Manager Administrator’s Guide
Publication Number: 53-1000196-01-HP
Using the Policy Editor
17
The selected policy appears (see Figure 17-8). The SES policy is used in this example; the MS
policy is similar.
Figure 17-8 Configuring the SES Policy
3. Click Create Policy.
The WWN of a device that connects to the fabric displays in the Available Access Points list.
4. Select a device from the Available Access Points list.
5. Click Add Device.
6. Click the Summary tab.
7. Click Save to save your changes but not apply them, or click Activate to save and apply your
changes.
The Security Policy Review dialog displays.
8. After reviewing the Security Policy, click one of the following:
• Continue (to continue applying your changes)
• Cancel (to cancel your changes)
• Copy to File (to copy the Security Policy to a file)
To make changes to your SES or MS policy
1. In the Information Panel, right-click the secure fabric for which you want to set policies and choose
Security > Security Policy Editor from the context menu.
The Policy Editor appears (see Figure 17-3 on page 17-4).
2. Click the tab that corresponds to the policy you want (SES or MS).
The selected policy appears (see Figure 17-8 on page 17-12).