Brocade Fabric Manager Administrator's Guide (53-10000196-01-HP, November 2006)

18-8 Fabric Manager Administrator’s Guide
Publication Number: 53-1000196-01-HP
Identifying Ports That Completed the RNID Exchange
18
Figure 18-4 Web Tools Switch Admin Module, Configure Tab
Identifying Ports That Completed the RNID Exchange
The following procedure describes how to identify ports that have completed the request node
identification (RNID) exchange.
To identify ports that have completed the RNID exchange
1. Launch the FC Port Connectivity View, as described in “Viewing Port Information” on page 11-4,
or access the FC Devices tab in the Information panel.
2. Scroll to the right in the FC Port Connectivity View or FC Devices tab to locate the Capability
column.
The Capability column identifies ports that have completed the RNID exchange with a value of
FICON.